대한민국 NO.1 RC커뮤니티 알씨원

회원가입

아이디/비밀번호찾기

BJ Q&A

BJ database

홈 > BJ craft story > BJ craft story > BJ비행기이야기

BJ비행기이야기

EPISODE Information

작성자: 박병준

조회: 145275 등록일: 2012-09-22

첨부파일:

bIMG_0423.JPG(891.9KB)Download: 135

<IMG src="/rankup_module/rankup_board/attach/bjair1/13482847449205.jpg" width=675> Episode is the plane which has canalizer (channelizer) The flyers who first experience canalizer (channelizer) type airplane have to know some things before their setting the plane. BJ CRAFT seeks the planes that general flyers more satisfy than top flyers. The airframe which has canalizer (channelizer) is generally too much sensitive in neutral position of rudder than it is necessary. The flyers who experience this type of plane first shall be flustered because the sensitive position is only neutral not whole position of the rudder. This problem can be released by wing fence on the stabilizer, which makes neutral position smooth but keeps power of whole rudder. so the stab fence should be installed onto Episode.    <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0426.JPG" width=670> The kits of Episode contains two pairs of stab fence and two pcs of jig for fence installation. The fence which is uncovered is for test, you can test your plane with uncovered stab fence, you shall be able to find out your best feeling setting. You shall use jig for Stab fence as shown in the picture, 90 degree fence is installed parallel to the derection of flight, 95 degree one has 5 degree offset to the parallel. You shall feel the difference of flight feeling if you install the fence with two jigs. you must choose the best setting for your flight favour through the test because the feeling is different from depending on the servo and individual flight character. The too much sesitiveness of neutral position of rudder shall be more dullin 95 degree(5 degree offset) than 90 degree (parallel to the direction of flight) <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0428.JPG" width=670> When you install the stab fence, draw the line along the jig on masking tape attached on the covered stab, then fix uncovered stab fence on the tape with CA. <IMG border=0 src="/upload2/files/data/77513d00deddfefe190ba3bcae2a0c31/bIMG_0430.JPG" width=670> Repeating these ways, find out the best location to install the stab fence, if you find out best position, you can install covered stab fence on the stab after taking away the masking tape. <IMG border=0 src="/upload2/files/data/77513d00deddfefe190ba3bcae2a0c31/bIMG_0431.JPG" width=670>   <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0429.JPG" width=670> <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/020-t.JPG" width=670> The starting CG of EPISODE same as Nuance  (Without Cannopy  with Cannopy 270mm) CG Range is very wide ..... When you try the maiden flight you may use only one long 8mm of carbon pipe which go through fuselage, after the flight, if C/G is decided, you may use wing adjuster, if necessary, or fix front two antilotating pin. <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0417.JPG" width=670> <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0420.JPG" width=670> <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0418.JPG" width=670> <IMG border=0 src="/upload2/files/data/805fd6dd54412a3100c03adad6bcc706/bIMG_0419.JPG" width=670> Wing incidence adjuster which contained in the kit together with jig can easily be used for the flyers who need it. Antilotating pin hole that setting is finished has already been made in the fuse after many tmes test. you may as well to use as factory sets. Paradigm & sky!.... BJ CRAFT